Platic modifier about B2 specification introduce

B2 is prepared by reactive grafting of maleic anhydride onto polypropylene. Due to the introduction of a strongly polar side group maleanhydride) in the main chain of polypropylene, Therefore, maleic anhydride grafted polypropylene can be a bridge to improve the adhesion and compatibility of polar and nonpolar materials. In the application of PP + glass fiber modification, it can react with the glass fiber after surface treatment, improve the compatibility of the PP and glass fiber, so as to improve the tensile strength and impact strength of polypropylene. When PP compatibilizer is added in the production of filled polypropylene, the compatibility of filler and polypropylene and the dispersion of filler can be greatly improved. This is a low odor PP compatibilizer, which meets the requirements of automobile manufacturers for the odor of automobile materials to a certain extent.

B2 is a maleic anhydride grafted polypropylene (PP) copolymer, which is commonly used as a coupling agent and compatibilizer in polymer blends containing PP and other polymers such as polyethylene (PE), polystyrene (PS), and ethylene-propylene-diene monomer (EPDM).

The preparation of B2 involves the reactive grafting of maleic anhydride (MAH) onto the polypropylene backbone. This is typically achieved through a melt grafting process, where PP and MAH are melt-blended in the presence of a free radical initiator. The maleic anhydride groups react with the PP backbone to form a grafted copolymer, which has both PP and MAH segments along the polymer chain.

The maleic anhydride functionality on B2 can then react with functional groups on the surface of other polymers in a blend, such as PE or PS, to create a stronger bond between the polymers. This improved compatibility can lead to improved mechanical properties and processing characteristics of the blend.

The Maleic Anhydride Polypropylene Compatibilizer improves the mechanical qualities, processability, and compatibility of polymer blends, providing outstanding value and performance. This compatibilizer transforms the performance of polymer blends with its maleic anhydride functional groups, polypropylene matrix, chemical reactivity, and desired rheological qualities.

Передовое оборудование!

Оснащен передовыми производственными линиями и экспериментальным испытательным центром для обеспечения качества продукции.

Сильная техническая сила!

Более 10 опытных технических специалистов по исследованиям и разработкам обеспечивают непрерывные инновации.

ПРИМЕЧАНИЕ: Приведенные выше данные являются типичными значениями испытаний и не должны интерпретироваться как спецификация: низкая 0,8 мас.ч. %

1.Comparison parameters of different applications

Table1:Typical Data of Reinforcing of PP Glass Fiber

Table2:Typical Data of Reinforcing of PP Mineral Fiber

Примечание:Все приведенные выше данные являются экспериментальными типичными значениями, только для справки.

Suggested dose: 3-10%，the dosemay be increased or decreased properly according to the toughness requirements and by taking the cost into consideration.

Packaging, storage and transportation: 20kg kraft bag with internal plastic bag. This product shall be treated as non-hazardous article and be stored or transported under dry conditions, and sunlight and rain shall be avoided.

• Functional Groups of Maleic Anhydride: The compatibilizer includes functional groups of maleic anhydride, which facilitate effective compatibilization and interfacial adhesion between various polymers in blends. The mechanical qualities and general performance of the mix are improved by this special feature.
• Polypropylene Matrix: The compatibilizer is built upon a polypropylene matrix, which offers superior compatibility with a variety of polymers and great thermal stability. This makes it possible to blend and combine various polymer components in an efficient manner.
• Chemical Reactivity: The compatibilizer’s maleic anhydride functional groups react chemically well with a variety of polar polymers. Better blend qualities are the outcome of this reactivity, which promotes covalent bonding and compatibilization between the polymer components.
• Rheological Properties: The compatibilizer has favorable rheological characteristics that make it easier to blend with various polymers and increase processability. These characteristics include good melt flow and viscosity control.

Наше преимущество

Глобальная цепочка поставок!

Система цепочки поставок Sound Storage And Logistics
Техническая поддержка
Послепродажная защита

Фокус - Достижение - Превосходство!

Продукция на заказ
Фокус на НИОКР
Глобальные услуги

Сертификация Coace!

Сертификация ISO9001:2015
Сертификация ISO14001:2015
Регистрация в ЕС REACH

Предварительная регистрация на K-REACH в Корее

Преимущество предприятия!

Укладка в стране и за рубежом, прекрасная для смешивания
Схема внутреннего маркетинга
Схема зарубежного маркетинга

1.Be used as the PP interface modifier for glass fiber reinforcing and mineral filling to increase the tensile strenth and bending strength.

2.Be used as PA/PP or PA/PE alloy compatibilizer.

Product features: Low odor

3 It can be used as a compatibilizer between inorganic reinforcing materials (glass fiber) and filling materials (calcium carbonate, talc, etc.) and PP;

4 Can be used as a compatibilizer for PP / nylon alloy:

5. Can be used as wood-plastic compatibilizer;

6. It can be used to improve the adhesion of PP to polar materials (metal, nylon, etc.).