제품

제품 용도 또는 제품 특성을 입력하세요.
필요하면
연락처. 

결합제로 사용되는 스피셜 제형 무수물 PPE는 우수한 접착 특성과 PA/PPE 혼합물에 대한 호환성을 제공합니다.

모델 번호: CS-1

소개:

무수물 변성 폴리페닐렌 옥사이드 공중 합체입니다. CS-1은 노란색을 띠고 냄새가 적은 과립입니다. PPO/PA66/GF33 시스템에서 사용할 수 있습니다.
물리적 Nominal values 테스트 방법
밀도 1.02g/cm³ ASTM D792
Melt flow rate(190℃、2.16kg) 8-15g/10분 ASTM D1238
말레산 무수물 함량 가운데 내부 방법
appearance 펠렛
제품 설명

 

A complete solution for improving the adhesion qualities and compatibility of PA/PPE blends is provided by our specially developed anhydride PPE coupling agent and compatibilizer. It gives producers and suppliers the tools to optimize their PA/PPE blend formulations for a variety of markets and applications thanks to its superior adhesion capabilities, increased compatibility, adaptability, thermal stability, and improved mechanical properties. You can improve the adhesion, mechanical performance, and product reliability of your PA/PPE blend products by using our product. Unlock the full potential of your PA/PPE blend compositions by investing in our specially designed anhydride PPE right away.

고급 장비!

제품 품질을 보장하기 위해 첨단 생산 라인과 실험 테스트 센터를 갖추고 있습니다.

고급 장비!

제품 품질을 보장하기 위해 첨단 생산 라인과 실험 테스트 센터를 갖추고 있습니다.

Mechanical properties of PPO/PA66/GF systems without and with CS-1 added

Formula 1#(%) 2#(%)
PPO 30 25
PA66 30 30
SEBS 7 7
GF 33 33
CS-1 0 5
성능 단위 1# 2#
DensityMelt flow rate (MFR) g/cm3 1.32 1.32
condition:280℃2.16kg g/10분 6.8 7.9
Heat distortion temperature(HDT) 0.45MPa,120℃/h 236.9 237.2
1.82MPa,120℃/h 204.6 204.8
인장 강도 Mpa 105.3 136.5
인장률 % 1.3 3.6
굽힘 강도 Mpa 142.6 191.6
굴곡 탄성률 Mpa 6150 6270
이조드 노치 충격 강도 J/m 65 132
Izod unnotched impact strength J/m 216 597

It can be seen from the above table that adding 5% CS-1, the tensile strength elongation at break, flexural strength and impact strength of the PPO/PA66/GF system are significantly improved, and the flexural modulus has little effect.

Application case two

Mechanical properties of PPO/PA66/GF systems without and with CS-1 added

Formula 1#(%) 2#(%)
PPO 45 40
PA66 45 45
SEBS 10 10
CS-1 0 5
성능 단위 1# 2#
densityMelt flow rate (MFR) g/cm3 1.078 1.075
Condition : 280℃2.16kg g/10분 12.8 10.2
Heat distortion temperature (HDT) 0.45MPa,120℃/h 192.6 188.5
1.82MPa,120℃/h 110.3 107.3
인장 강도 Mpa 42.6 55.8
인장률 % 3.1 76.5
굽힘 강도 Mpa 58.3 59.6
굴곡 탄성률 Mpa 1820 1790
노치 충격 강도 J/m 28 268
Lzod unnotched impact strength J/m 253 NB

It can be seen from the above table that the addition of 5% CS-1 increases the tensile strength, elongation at break and impact strength of the alloy system significantly, but has little effect on the flexural strength and flexural modulus.

Recommended dosage
3-8%, which can be increased or decreased in moderation according to the actual application, taking into account the cost.

Packaging and Storage
25KG kraft paper bag lined with plastic bag, as non-dangerous goods, avoid sunlight and rain.

 

특성

 

CS-1are granules with yellow color, low odor. It can be used in PPO/PA66/GF33 System.

물리적 Nominal values 테스트 방법
밀도 1.02g/cm³ ASTM D792
Melt flow rate(190℃、2.16kg) 8-15g/10분 ASTM D1238
말레산 무수물 함량 가운데 내부 방법
appearance 펠렛

 

당사의 장점

글로벌 공급망!

사운드 스토리지 및 물류 공급망 시스템
기술 지원
판매 후 보호

집중 - 성취 - 우수성!

맞춤형 제품
R&D에 집중
글로벌 서비스

코이스 인증!

ISO9001:2015 인증
ISO14001:2015 인증
EU REACH 등록

한국 K-REACH 사전 등록

기업의 이점!

국내외를 넘나드는 레이아웃, 믹스 앤 매치하기 좋은 디자인
국내 마케팅 레이아웃
해외 마케팅 레이아웃

 

 

애플리케이션

 

It can be seen from Figure 1 that the PPO phase of the alloy system without compatibilizer is large in size and irregular in size, showing a typical dual-continuous phase structure. Add 5%CS-1, the size of the dispersed phase is obviously reduced, and it is a regular spherical shape with uniform distribution.
It can be used as compatibilizer of polyamide and polyphenylene oxide alloy.Solutions by industryThe following areas see considerable use of the specially formulated anhydride PPE coupling agent and compatibilizer:Automotive: This product is excellent for improving the performance of PA/PPE blends used in automotive applications, such as electrical connectors, under-the-hood components, and interior automobile components. By enhancing the adherence of PA and PPE, it ensures the dependability and durability of automotive parts in challenging conditions.

Electrical and electronic applications, such as connections, switches, and housings, require the PA/PPE mixes’ qualities to be optimized, which calls for the coupling agent. It improves the compatibility and adherence of the two polymers, resulting in good thermal stability and electrical insulation.

Industrial Equipment: Our specially formulated anhydride PPE is ideal for PA/PPE blends used in applications for industrial equipment, such as gears, bearings, and pump components. It enhances mechanical qualities and wear- and friction-resistance, ensuring dependable performance in industrial situations.

Consumer Goods: The qualities of PA/PPE blends used in the manufacture of consumer goods, such as toys, athletic equipment, and appliances, must be improved with the use of this coupling agent. It improves the adherence of PA and PPE, producing goods that are robust, impact-resistant, and aesthetically pleasing.

 

문의 양식

좋아할지도 모릅니다.

폴리아미드 공중 합체를 위한 낮은 유리 전이 온도 충격 개질제

모형: W1F-2

소개:

Coace® W1F-2 는 유형 의 화학적으로 기능화 base copolymer as impact modifiers 와 함께 low 유리 전환 온도. It 전시 우수 유동성 동안 의 제조 프로세스.


자세히 보기 →

난연성 폴리아미드 화합물용 충격 개질제

모델 번호: W1A-4

소개:

Coace ® W1A-4 is an anhydride modified polyolefin elastomer as impact modifiers with high graftingrate, which has low glass transition temperature.


자세히 보기 →

분산이 용이한 무기 EVA 필름 산성화 방지 마스터배치

모형: RM210A

소개:

RM210A는 무기 EVA 산성화 방지 마스터배치입니다. 첨가량이 적고 효율이 높으며 분산이 용이하고 빛 투과율에 거의 영향을 미치지 않는 특징이 있습니다.


자세히 보기 →

폴리아미드 화합물용 충격 개질제

모델 번호: W1D

소개:

W1D is a maleic anhydride polyolefin copolymer as impact modifiers for PA6, PA66 with special treament.


자세히 보기 →

메시지 남기기