제품

제품 용도 또는 제품 특성을 입력하세요.
필요하면
연락처. 

PBT 강화제 호환제

모형: W5A-2

소개: 소개

Coace® W5A-2는 글리시딜 메타크릴레이트 개질 폴리올레핀 탄성 중합체로 접목률이 높습니다.
특성 가치 단위 테스트 방법
모양 과립
색상 흰색
밀도 0.88 g/cm3 ASTM D792
용융 유량(190℃2.16kg) 3-8 g/10분 ASTM D1238
Glycidyl Methacrylate Content 높음 wt% COACE 방법[1]
제품 설명

 

Coace® W5A-2 is a glycidyl methacrylate modified polyolefin elastomer with high grafted rate. The GMA-POE with a high grafted rate has several desirable properties, such as improved adhesion to polar surfaces, increased toughness, and enhanced thermal stability. These properties make it suitable for various applications, such as adhesives, coatings, and engineering plastics.

Glycidyl methacrylate modified polyolefin elastomer (GMA-POE) with a high grafted rate is a type of polymer material that is created by grafting glycidyl methacrylate (GMA) onto a polyolefin elastomer backbone. The high grafted rate refers to the amount of GMA that is chemically bonded to the polyolefin elastomer backbone, which can be achieved through a variety of methods.

A specialist polymer additive called W5A-2 Glycidyl Methacrylate Modified Polyolefin Elastomer is used to improve the performance of polyester compounds, especially polybutylene terephthalate (PBT) and polyethylene terephthalate (PET). This chemical improves the mechanical characteristics and processability of polyester compounds by acting as a toughener and compatibilizer. The W5A-2 additive presents an appealing option for numerous industries looking for high-performance polyester materials thanks to its distinctive composition and remarkable properties.

 

고급 장비!

제품 품질을 보장하기 위해 첨단 생산 라인과 실험 테스트 센터를 갖추고 있습니다.

강력한 기술력!

More than 10 experienced technical R&D staff drive continuous innovation

특성

 

특성 가치 단위 테스트 방법
모양 과립
색상 흰색
밀도 0.88 g/cm3 ASTM D792
용융 유량(190℃2.16kg) 3-8 g/10분 ASTM D1238
Glycidyl Methacrylate Content 높음 wt% COACE 방법[1]

참고: [1] 낮음<0.4wt%; 중간(0.4wt%-0.8wt%); 높음≥0.8wt%.

  • The GMA-POE can be prepared through a melt-grafting process or through a solution-grafting process. In the melt-grafting process, the POE is melted and mixed with GMA, and a radical initiator is added to initiate the grafting reaction. The resulting material is then cooled and solidified. In the solution-grafting process, the POE is dissolved in a solvent, and GMA and a radical initiator are added to the solution. The resulting material is then precipitated and dried.
  • The high grafted rate of GMA in the POE can be achieved through various methods, such as controlling the reaction conditions, using a suitable initiator, and optimizing the ratio of GMA to POE. A higher grafted rate typically leads to better adhesion properties and improved thermal stability.

In summary, GMA-POE with a high grafted rate is a polymer material that is created by grafting GMA onto a polyolefin elastomer backbone. It has several desirable properties, including improved adhesion to polar surfaces, increased toughness, and enhanced thermal stability, making it suitable for various applications such as adhesives, coatings, and engineering plastics.

이점

 

W5A-2 works as a compatibilizer in polyester compounds, making it easier to mix various polymers together and increasing their compatibility. The additive allows efficient interfacial adhesion between the polyester matrix and additional polymers or fillers by including glycidyl methacrylate (GMA) functional groups. The mechanical characteristics, phase separation, and overall performance of the polyester compounds are all improved as a result of the increased compatibility.

Effect of Toughening:Polyester compounds, including PBT and PET, frequently display brittleness and poor impact resistance. These restrictions are addressed by the W5A-2 additive, which has a toughening effect. The additive’s modified polyolefin elastomer component enhances the impact resistance and energy absorption capabilities of the polyester compounds. The finished materials are appropriate for demanding applications due to their improved resistance to cracking, impact, and deformation.

Enhancement of Mechanical Properties:The W5A-2 addition considerably improves a number of mechanical properties of polyester compounds, including:

a. Tensile strength and modulus are enhanced by the addition of the W5A-2 additive, which also makes polyester compounds more durable and able to endure greater mechanical loads.

b. Flexibility and Elongation at Break: The polyester compounds receive greater flexibility from the modified polyolefin elastomer component, which also improves their elongation at break. This property guarantees that the materials may be deformed without breaking, improving durability and crack resistance.

c. Impact Resistance: The polyester compounds’ ability to tolerate abrupt impacts and mechanical shocks is improved by the W5A-2 addition. This quality is especially useful in applications that call for materials with great toughness and impact resistance, such automobile parts and electrical enclosures.

In addition to mechanical improvements, the W5A-2 additive also provides many processing benefits for polyester composites.

a. Improved Melt Flow: The modified polyolefin elastomer component of the additive enhances the polyester compounds’ melt flow characteristics.

This advancement makes extrusion and injection molding easier to process, which improves manufacturing processes and shortens cycle times.

b. Lower Processing Temperature: When fabricating polyester compounds, the W5A-2 additive enables a lower processing temperature. This benefit improves energy efficiency while lowering the chance of thermal damage and maintaining the material’s overall qualities.

c. superior Mold Release: By promoting superior mold release capabilities, the W5A-2 additive lowers the risk of sticking or adhesion during the molding process. Higher productivity and more efficient production processes are both facilitated by this quality.

당사의 장점

Gobal Supply Chain!

사운드 스토리지 및 물류 공급망 시스템
기술 지원
판매 후 보호

Focus • Achievement • Excellence!!

맞춤형 제품
R&D에 집중
글로벌 서비스

코이스 인증!

ISO9001:2015 인증
ISO14001:2015 인증
EU REACH 등록

한국 K-REACH 사전 등록

기업의 이점!

국내외를 넘나드는 레이아웃, 믹스 앤 매치하기 좋은 디자인
국내 마케팅 레이아웃
해외 마케팅 레이아웃

 

 

애플리케이션

 

1.To be used as a toughener for polyester and the fire retardant filled polyester, eg. PET,PBT, PET/FR, PBT/FR, and other polyester compounds.

2.To be used as a compatibilizer for polyolefin and polyester alloys.

3.To be used as an adhesive for some laminate structures.

 

 

문의 양식

좋아할지도 모릅니다.

TPE 코팅 재료용 고유동성 접착제

모델 번호: W1A-F

소개:

Coace® W1A-F는 TPE 코팅 재료용 접착제로 사용되는 화학 개질 폴리올레핀 엘라스토머입니다. 제조 공정 중 유동성이 높고 유리 전이 온도가 낮은 것이 특징입니다.


자세히 보기 →

접목률이 높은 무수물 변성 폴리올레핀 엘라스토머 호환제

모델 번호: W1A-5

소개:

Coace® W1A-5 is an anhydride modified polyolefin elastomer as compatibilizers to improve the compatibility between polyamideandpolypropylene, or polyethylene with high graftingrate, which has low glass transition temperature.


자세히 보기 →

PC/ABS 합금용 담황색 펠릿 호환제

모델 번호: KS-03

소개:

Coace® KS-03은 스티렌-아크릴로니트릴-말레산 무수물 공중합체입니다.


자세히 보기 →

고성능 차단 접착제

모형: K2B

소개:

COACE의 K2B의 주요 소재는 분자 사슬에 비닐 아세테이트 단량체를 포함하고 있어 폴리에틸렌의 결정성을 감소시키고 복합 필름의 열 밀봉 성능을 더욱 향상시킵니다.


자세히 보기 →

메시지 남기기