무수 말레 산염 SEBS 폴리머는 높은 열 안정성을 유지하고 최적의 분산 품질과 내열성 노화 저항성을 제공합니다.

Engineering Plastics Toughening Compatible Agent

Engineering Plastics Toughening Compatible Agent Factory

Compolymer Toughening Compatible Agent Suppliers

Compolymer Toughening Compatible Agent Factory

모형: W1G

소개:

W1G는 말레산 무수물 접목 폴리머입니다. SEBS 엘라스토머가 기본 재료로 사용됩니다. 이 제품은 유동성이 우수하고 온도 저항성과 노화 저항성이 우수합니다.

테스트 항목	테스트 데이터	테스트 방법
밀도	0.91 g/cm³	ASTM D792 ISO 1183
녹는 지수	2-9 (190℃,50kg) g/10min	ASTM D1238 ISO 1133
접목률	Medium	산-염기 적정
외관	흰색 또는 밝은 노란색 세분화

문의

제품 설명

When used as a chemical addition for polymer modification, the Maleic Anhydride SEBS Copolymer Toughening Agent provides outstanding value and effectiveness. This toughening agent allows polymers to reach their maximum potential because of its maleic anhydride modification, compatibility with SEBS copolymers, toughening action, and compatibility with a variety of polymers.Maleic Anhydride SEBS Copolymer Toughening Agent can be added to formulations to improve toughness, durability, energy absorption efficiency, and adaptability for a range of applications in consumer goods, automotive, electronics, and packaging.

고급 장비!

제품 품질을 보장하기 위해 첨단 생산 라인과 실험 테스트 센터를 갖추고 있습니다.

강력한 기술력!

10명 이상의 숙련된 기술 R&D 직원이 지속적인 혁신을 주도합니다.

Typical Data of Toughening of PA6 Resin

성능	단위	PA6	PA6+15%W1G	PA6+20%W1G
인장 강도	MPa	60	51	45
굴곡 강도	MPa	90	73	67
노치 충격 강도	J/m	80	650	820

It can be seen from the above table that W1G has a good effect in nylon toughening and can greatly improve the toughness of nylon.

Typical data for PA/PPO alloys

Formula	1#(%)	2#(%)	3#(%)	4#(%)
PA6-3280	25	⸺	30	60
PPA66-EPR27		65	⸺	⸺
PPO	60	20	50	45
CS-1 (PP0 Compatibilizer)	10	10	15	15
W1G (toughening agent)	5	5	5	5
Silicone powder	0.5	0.5	⸺	⸺
PETS	⸺	⸺	0.3	0.3

From the above table, it can be easily seen that the PW1G/PO alloy can improve the flexibility of the product on PA, and the product is easier to carry forward.

특성

테스트 항목	테스트 데이터	테스트 방법
밀도	0.91 g/cm³	ASTM D792 ISO 1183
녹는 지수	2-9 (190℃,50kg) g/10min	ASTM D1238 ISO 1133
접목률	Medium	산-염기 적정
외관	흰색 또는 밝은 노란색 세분화

Maleic Anhydride Modification: To strengthen its chemical linkages with the polymer matrix, maleic anhydride is added to the toughening agent. By improving the toughening agent and polymer’s compatibility and interfacial adhesion, this change allows for more uniform dispersion and better mechanical characteristics.
The toughening agent is formulated using the styrene-ethylene/butylene-styrene (SEBS) copolymer, which has remarkable compatibility with an array of polymer matrices. It guarantees even dispersion and effective mixing throughout the polymer, which enhances its toughness and resistance to impacts.
Toughening Effect: Polymers’ toughness and impact resistance are greatly increased by the Maleic Anhydride SEBS Copolymer Toughening Agent. The process of energy absorption and dispersion during deformation lessens the likelihood of crack propagation and improves the material’s resistance to impact and dynamic stress.
Compatibility with a Wide Range of Polymers: The toughening agent shows compatibility with engineering plastics, ABS, polypropylene, polyethylene, and polystyrene, among other polymer matrices. It provides flexibility and adaptability, enabling the creation of unique solutions to satisfy certain performance standards.

이점

Increased Toughness: Polymers become more resilient when the Maleic Anhydride SEBS Copolymer Toughening Agent is included. It produces materials that can endure demanding applications and difficult environments by improving the impact resistance, tensile strength, and elongation at break.

Increased Durability: Polymer products have increased durability thanks to the toughening ingredient. It guarantees the modified polymers’ long-term performance and dependability by lowering the chance of cracking, delamination, and deformation.

Effective Energy Absorption: By effectively absorbing and distributing energy during deformation, the toughening agent lowers the chance of stress concentration and crack propagation. It improves the material’s resistance to impact and dynamic loading, making it appropriate for uses where strong impact resistance is needed.

Versatile Uses: The Maleic Anhydride SEBS Copolymer Toughening Agent is used in a wide range of fields and sectors, such as consumer products, automotive, electronics, and packaging. Because of its adaptability, various polymers can be altered to satisfy particular performance needs.

당사의 장점