글 찾기
Four points let you understand the conveyor block

Starting from this section, I will tell you about an understanding of threaded components by category. Let’s take the most common model called 65 machine as an example to talk about a major category of threaded components called conveying blocks.Here are four key points to share with you.

01Conveyor block type

For the 65 machine type, there are several different types of conveyor blocks, such as 96/96, 72/72, 64/64, 56/56, 44/44 and 22/22. Also with L, there will probably be several types of conveyor blocks.

 

02 Conveyor block difference

The second point, let me tell you the difference. Usually, the larger the number, the longer the length and the larger the lead. The better the conveying capacity is, if the number is small, such as 96 and 44, it is obvious that the conveying capacity of 44 is definitely not as good as 96, but it can compress the material, so the ability to compress the material is better.

 

03 reverse threaded element

The third point is that there is also a threaded element such as 22/22, which has an L behind it. Usually it is a reversed threaded element. When it is pushed forward, it reaches this 22/ 22L, it flows back in the opposite direction. Usually, this threaded element will be used at the junction of the previous section of the exhaust port or the vacuum port to increase the pressure of the corresponding cylinder, and then the pressure will be instantaneous when it reaches the exhaust port. It can be lowered so that it can exhaust better, and there will be no leakage during the exhaust process.

 

04 Conveyor block difference

The fourth point, all the conveying blocks have several different ways, such as single head, multi head and double head. Usually, what we use is mainly double head. The main function of single head is that the conveying capacity is particularly good, and then The gap between it and the barrel is also very small, so we usually use this threaded element at the end of the barrel of the extruder, that is, near the die, to improve the extrusion die. One pressure, what is the use of the three heads generally, because there are deep grooves and shallow grooves in the twin-screw, usually a screw with shallow grooves, because it needs to be designed with shallow grooves, so it will send the threaded elements, that is, convey Block will design it as a structure with three heads, so that its extension becomes shallower.

최근 기사

나일론 인성 향상을 위해 적절한 POE 접목 무수 말레 산염을 선택하는 방법은 무엇입니까?

특히 보강 및 충진이 필요한 PA6, PA66 및 폴리아미드 시스템을 위한 충격 완화제로 설계된 Coace® W1A-F는 특별한 특성으로 인해 향상된 내충격성과 인성이 가장 중요한 용도에 완벽한 선택이 될 수 있습니다.

자세히 보기 →

PBT 개질의 새로운 돌파구: POE-g-GMA 강화제의 혁신적인 적용

PBT 개질에 POE-g-GMA 강화제를 사용하면 PBT 소재의 취성을 해결할 뿐만 아니라 새로운 플라스틱 산업 발전 방향을 제시할 수 있습니다.

자세히 보기 →

PP/PE 복합 소재에 필러를 추가할 때 호환제를 추가해야 하나요?

PP-g-MAH 호환제의 사용법을 조사하고 싶다면 전문 화학물질 공급업체에 문의하면 샘플과 기술 지원을 받을 수 있습니다. COACE와 상담하면 특정 애플리케이션 요구 사항을 충족하는 맞춤형 믹스를 만들 수 있습니다.

자세히 보기 →

메시지 남기기