글 찾기
Do a good job of nylon toughening, how to choose nylon

The previous section mentioned that a suitable toughening agent must be selected for nylon toughening. In this section, we share another important factor – how to understand and choose nylon.

Among the modified nylon, usually more than 90% are nylon 6 and nylon 66, that is, PA6 and PA66, which account for more than 90% of the entire nylon modification.

Therefore, in this section, I will tell you how to understand and choose nylon 6 and nylon 66.

(Nylon 6 and Nylon 66 molecular formula)

For PA6, it can usually be divided into three categories. From the perspective of viscosity, it can be divided into high viscosity, medium viscosity and low viscosity.

1.High viscosity nylon

Viscosity above 3.0

Generally speaking, high-viscosity nylon, because of its high viscosity, has better comprehensive physical properties, stretch bending and punching. It is used as a composite material toughened by nylon, and its comprehensive properties are better.

2.Low viscosity nylon

Low viscosity refers to below 2.4

Skip the medium viscosity and directly talk about low viscosity. Because of low viscosity, low viscosity brings good fluidity. When doing nylon toughening, it can make the toughening agent form a relatively large particle size distribution, thus reflecting the normal temperature impact It is also relatively good, but due to its viscosity problem, the low temperature resistance performance is reduced.

3.Medium viscose nylon

Viscosity 2.7-2.8

The most commonly used is of course medium-viscosity nylon, but people often find that when medium-viscose nylon is used for toughening, the impact strength at room temperature is often not easy to improve. In this case, it is recommended to compound a small amount of low-viscosity nylon on the basis of using medium-viscosity nylon, so as to increase the impact strength at room temperature while ensuring low-temperature performance, so as to ensure fluidity and reflect the properties of nylon toughened materials. Effect.

최근 기사

나일론 인성 향상을 위해 적절한 POE 접목 무수 말레 산염을 선택하는 방법은 무엇입니까?

특히 보강 및 충진이 필요한 PA6, PA66 및 폴리아미드 시스템을 위한 충격 완화제로 설계된 Coace® W1A-F는 특별한 특성으로 인해 향상된 내충격성과 인성이 가장 중요한 용도에 완벽한 선택이 될 수 있습니다.

자세히 보기 →

PBT 개질의 새로운 돌파구: POE-g-GMA 강화제의 혁신적인 적용

PBT 개질에 POE-g-GMA 강화제를 사용하면 PBT 소재의 취성을 해결할 뿐만 아니라 새로운 플라스틱 산업 발전 방향을 제시할 수 있습니다.

자세히 보기 →

PP/PE 복합 소재에 필러를 추가할 때 호환제를 추가해야 하나요?

PP-g-MAH 호환제의 사용법을 조사하고 싶다면 전문 화학물질 공급업체에 문의하면 샘플과 기술 지원을 받을 수 있습니다. COACE와 상담하면 특정 애플리케이션 요구 사항을 충족하는 맞춤형 믹스를 만들 수 있습니다.

자세히 보기 →

메시지 남기기