글 찾기
Application of POE Polyolefin Elastomer in Photovoltaic Field

Photovoltaic power generation will have plenty of potential to grow as carbon neutrality becomes a global focus. The total installed capacity of photovoltaic systems throughout the world was 760.4 GW as of the end of 2020. The majority of the material used to make the film is EVA, with an ever-rising fraction of POE.

The history of the solar sector has been one of constant cost- and efficiency-cutting improvements. What are the benefits of POE materials as they are substantially more expensive than EVA? From the aforementioned perspectives, we will introduce POE today.

1.POE  use in the photovoltaic sector

comprehending the PID, which is frequently used in the solar business, is important before comprehending the application of POE in that sector. Potential Induced Degradation, often known as potential induced decay, is the full name of PID in English.

The PID effect was first identified and proposed by the American company SunPower Corporation in 2005. It describes a situation in which components operate at high voltage for an extended period of time, leakage current exists between the cover glass, packaging material, and frame, and a significant charge builds up on the cell surface, causing the surface to passivate. The component’s performance falls short of the design requirement as a result of the deteriorating effect, which also causes a drop in fill factor, short-circuit current, and open-circuit voltage, but this attenuation is reversible.

Application of POE Polyolefin Elastomer in Photovoltaic Field1

The PID effect has also been discovered and is now understood by several research. When the solar module is negatively biased, anode ions—typically Na ions—flow into the battery sheet from the leakage current, lowering the battery’s parallel resistance. The semiconductor develops impurities, and these impurities may create conductive channels inside the battery, lowering the module’s current output.The third reason for the PID effect of photovoltaic modules is that the edge of the module is vulnerable to water vapor infiltration, EVA will produce acetic acid after hydrolysis, and acetic acid reacts with sodium in the glass to produce a large number of freely moving Na ions. These Na ions then react with the silver grid lines on the surface of the battery sheet, corroding them and increasing series resistance, which causes attenuation.

Having stated that, it is actually to illustrate how PID is connected to the hydrolysis of EVA.

POE film-encapsulated photovoltaic modules can have a longer product life cycle and higher durability since they have a low water vapor transfer rate, which removes the corrosion issues brought on by the use of EVA encapsulation films. Enhance the production of electricity, increase the efficacy, dependability, and lifespan of solar modules, increase their tolerance to potential-induced attenuation (PID), and decrease the likelihood of premature module failure and replacement. Additionally, POE is increasingly frequently employed on the back side of bifacial power production and PERC cell components in order to address PID. PID on the front side and POE on the front side make N-type TOPCon simple to utilize.

최근 기사

나일론 인성 향상을 위해 적절한 POE 접목 무수 말레 산염을 선택하는 방법은 무엇입니까?

특히 보강 및 충진이 필요한 PA6, PA66 및 폴리아미드 시스템을 위한 충격 완화제로 설계된 Coace® W1A-F는 특별한 특성으로 인해 향상된 내충격성과 인성이 가장 중요한 용도에 완벽한 선택이 될 수 있습니다.

자세히 보기 →

PBT 개질의 새로운 돌파구: POE-g-GMA 강화제의 혁신적인 적용

PBT 개질에 POE-g-GMA 강화제를 사용하면 PBT 소재의 취성을 해결할 뿐만 아니라 새로운 플라스틱 산업 발전 방향을 제시할 수 있습니다.

자세히 보기 →

PP/PE 복합 소재에 필러를 추가할 때 호환제를 추가해야 하나요?

PP-g-MAH 호환제의 사용법을 조사하고 싶다면 전문 화학물질 공급업체에 문의하면 샘플과 기술 지원을 받을 수 있습니다. COACE와 상담하면 특정 애플리케이션 요구 사항을 충족하는 맞춤형 믹스를 만들 수 있습니다.

자세히 보기 →

메시지 남기기