商品説明
W5Aは、グリシジルマルアクリレートをグラフト化したポリオレフィン系エラストマーで、特にポリエステルやポリカーボネート素材の相溶化剤や強靭化剤に適しています。
The thermoplastic elastomer known as Polyolefin Elastomer (POE) uses metallocene as a catalyst to produce a narrow relative molecular weight dispersion and homogeneous distribution of short chain branches. This elastomer’s primary performance is quite noticeable, and its performance indicators in many areas surpass those of regular elastomers.
In situ polymerization of ethylene and octene employing a metallocene catalyst produces POE plastic, a thermoplastic elastomer. These are some of its traits:
(1) The crystalline ethylene chain acts as the physical cross-linking point and the soft crimped chain structure of octene gives it great toughness and processability.
(2) POE plastic offers high aging resistance because its molecular structure lacks unsaturated double bonds.
(3) POE plastic is compatible with polyolefin well and has a limited molecular weight distribution.
(4) Good fluidity not only increases the strength of fusion mark goods but also the dispersion impact of filler.
The polyolefin elastomer in this product has been grafted with glycidyl mathacrylate, making it particularly useful as a toughener and compatibilizer for polyester or polycarbonate materials.Glycidyl methacrylate, a strong polar reactive group, is added to POE to create W5A polyester compatibilizer, a substance with high polarity and reactivity that may be utilized for a variety of purposes, including filling and toughening as well as flame retardancy. The performance of a product can be enhanced by successfully modifying polyester material to increase composite material compatibility and filler dispersion. Additionally, it serves as an alloy compatibilizer for PC and PBT, among other materials.
| Product Model | W5A |
| 外観 | 白い顆粒 |
| Melt Index(190°C,2.16Kg):g/10min | 3-5 |
| Grafting Ratio | 高い |
| Density(g/cm3) | 0.88 |
申し込み
|
|
Table1: Typical Data of Reinforcing And Toughening of PBT.
| パフォーマンス | 単位 | PBT+30%GF | PBT+30%GF+5%W5A |
| 引張強さ | MPa | 130 | 110 |
| 曲げ強度 | MPa | 170 | 160 |
| Lzodノッチ付き衝撃強さ（23） | J/m | 90 | 140 |
Table2: Typical Data of Reinforcing And Inflaming Retarding of PBT.
| パフォーマンス | 単位 | PBT+30%GF/FR | PBT+30%GF/FR+3%W5A |
| 引張強さ | MPa | 110 | 110 |
| 曲げ強度 | MPa | 165 | 150 |
| Lzodノッチ付き衝撃強さ（23） | J/m | 65 | 105 |
Table3: Typical Data of PC/PBT.
| パフォーマンス | 単位 | PC+25%PBT | PC+20%PBT+5%W5A |
| 引張強さ | MPa | Poor Compatibility,Having stratification | 55 |
| 曲げ強度 | MPa | 85 | |
| Lzodノッチ付き衝撃強さ（23） | J/m | 750 |
注：上記のデータはすべて実験的な代表値であり、参考値である。
Table4: Performance comparison of W5A and imported Polyester toughening agent in PBT.
| パフォーマンス | 単位 | Testing Method | 85%PBT+15%W5A | Add 15% imported Polyester toughening agent |
| 引張強さ | MPa | D-638 | 38 | 38 |
| Tensile rate | % | D-638 | 71 | 67 |
| Bending Strength | MPa | D-790 | 58 | 57 |
| 曲げ弾性率 | MPa | D-790 | 1461 | 1397 |
| アイゾット・ノッチ衝撃強さ | J/M | D-256 | 520 | 550 |
| Melt Index(235°C,2.16Kg) | g／10分 | D-1238 | 9.22 | 9.82 |
注：PBT TAIWAN CHANGCHUN 1100-211M
From above date we know that the super-toughening effect achieved by adding this product in the PBT toughening system is close to that of imported polyester toughening agents.
推奨量The dose (3-10%) may be increased or decreased properly according to the toughness requirements and by taking the cost into consideration.
梱包、保管、輸送：20kg クラフト袋、ポリ袋入り。本製品は非危険物として取り扱い、乾燥した条件下で保管または輸送し、日光や雨を避けなければならない。
Flame retardant classification
It may be broken down into halogen series, organophosphorus series, halogen-phosphorus series, nitrogen series, silicon series, aluminum-magnesium series, molybdenum series, etc. depending on the kind of element. There are intumescent flame retardants, charcoal flame retardants, etc., depending on the flame retardant effect. It may be separated into inorganic flame retardants, organic flame retardants, polymer flame retardants, etc. based on the chemical structure. They may be separated into additive and reactive flame retardants based on how they interact with other flame retardants and other flame retardant compounds. The chemical reaction of polymers involves reactive flame retardants.
高度な設備！
先進的な生産ラインと実験試験センターを備え、製品の品質を保証する。
強力な技術力！
10人以上の経験豊富な技術研究開発スタッフが、絶え間ない技術革新を推進しています。
特徴
This product is polyolefin elastomer grafted with glycidyl mathacrylate , which is especially suitable for the compatibilizer and toughener of polyester or polycarbonate materials.
- The flame retardancy of plastic alloys is greatly enhanced by the High Reactivity Low Residue Glycidyl Ester Grafted Polymer POE-g-GMA Plastic Alloy Flame Retardant Compatibilityizer
- Toughener. The danger of fire risks is decreased because it creates a barrier of protection that stops the spread of flames.
- The strong Reactivity Low Residue Glycidyl Ester Grafted Polymer POE-g-GMA Plastic Alloy Flame Retardant Compatibilizer Toughener is the perfect option for applications that call for strong impact resistance due to its toughening qualities. It efficiently absorbs and distributes energy, protecting the plastic alloy from fractures and splits.
メリット
Improved Performance: The characteristics and performance of plastic alloys are greatly enhanced by the High Reactivity Low Residue Glycidyl Ester Grafted Polymer POE-g-GMA Plastic Alloy Flame Retardant Compatibilizer Toughener. It improves compatibility, mechanical strength, and flame resistance, producing end products that are dependable and long-lasting.
Process Efficiency: The product’s strong reactivity and low residual qualities simplify the processing steps, which lowers production costs and increases productivity. Its ability to work with different polymer matrices makes it compatible and blends well, reducing processing issues.
Flame Retardancy: In situations where plastic alloys are used, the grafted polymer’s flame retardant qualities help to improve fire safety. This benefit guarantees adherence to industry standards and raises the final product’s overall dependability.
当社の強み
グローバル・サプライチェーン
健全な保管・物流サプライチェーンシステム
テクニカルサポート
アフターサービス
フォーカス - アチーブメント - エクセレンス！
カスタマイズ製品
研究開発に注力
グローバルサービス
コエース認証！
ISO9001:2015認証
ISO14001:2015認証
EUのREACH登録
韓国K-REACH事前登録
企業の利点！
国内外でのレイアウト、ミキシングに最適
国内マーケティング・レイアウト
海外マーケティング・レイアウト
申し込み
1. Be utilized as a toughener and compatibilizer for PBT, PET, PC, and other reinforcement and flame retarding materials.
2. Be used to make PC/PBT, PC/PET, and other alloy materials more compatible and durable.
