ポスト検索
Forming characteristics of modified plastic

What are the main process characteristics of modified plastics?

1.Nylon is susceptible to moisture.

In the atmosphere, the equilibrium water absorption rate of PA is 3.5%, 2.5% of PA66, 1.5% of PA610 and 0.8% of PA1010.

The water content of nylon has great influence on its mechanical properties. In the molten state, the presence of water will cause the hydrolysis of nylon resulting in molecular weight

To reduce the mechanical properties of the products, but also in the molding of the surface of the products appear bubbles, silver and markings and other defects. So it must be full before forming Dry.

2. Nylon melt has low viscosity and high fluidity, and the nozzle will produce “casting” phenomenon. Waste raw materials, contaminate nozzles. If you use a screw injection

Machine molding, injection, melt will appear between the screw and the cylinder wall countercurrent, so that the injection is not allowed, so, nylon in screw injection machine molding, the end of the screw must be installed in the reverse ring.

3. Nylon is a crystalline polymer. The melting point is obvious, and higher, so nylon needs to be formed at a higher temperature

Poor thermal stability, easy to decompose. Therefore, the technological conditions must be strictly controlled.

4 nylon molding shrinkage rate is large,

for the manufacture of high precision products, mold design should be based on the test to determine its size, molding process should be strictly controlled.

 

新しい 記事

ナイロン強靭性向上のための適切なPOEグラフト無水マレイン酸の選び方とは?

補強と充填を必要とするPA6、PA66、ポリアミド系用の耐衝撃性改良剤として特別に設計されたCoace® W1A-Fは、その特殊な特性により、耐衝撃性と靭性の強化が最も重要な用途に最適です。

もっと読む→→→。

PBT改質における新たなブレークスルー:POE-g-GMA強化剤の画期的な応用

PBT改質におけるPOE-g-GMA強靭化剤の使用は、PBT材料の脆性に対処するだけでなく、プラスチック産業の新たな発展方向を提供する。

もっと読む→→→。

PP/PE複合材料にフィラーを加える場合、相溶化剤を加える必要がありますか?

PP-g-MAH相溶化剤の使用法を調べたい場合は、専門の化学品サプライヤーと連絡を取ることで、サンプルや技術サポートを得ることができる。COACEに相談することで、特定の用途のニーズを満たすためにミックスをカスタマイズすることができます。

もっと読む→→→。

メッセージを残す