Descrizione dei prodotti
A complete solution for improving the adhesion qualities and compatibility of PA/PPE blends is provided by our specially developed anhydride PPE coupling agent and compatibilizer. It gives producers and suppliers the tools to optimize their PA/PPE blend formulations for a variety of markets and applications thanks to its superior adhesion capabilities, increased compatibility, adaptability, thermal stability, and improved mechanical properties. You can improve the adhesion, mechanical performance, and product reliability of your PA/PPE blend products by using our product. Unlock the full potential of your PA/PPE blend compositions by investing in our specially designed anhydride PPE right away.
Attrezzature avanzate!
Dotata di linee di produzione avanzate e di un centro di prove sperimentali per garantire la qualità del prodotto.
Attrezzature avanzate!
Dotata di linee di produzione avanzate e di un centro di prove sperimentali per garantire la qualità del prodotto.
Mechanical properties of PPO/PA66/GF systems without and with CS-1 added
| Formula | 1#（%） | 2#（%） |
| PPO | 30 | 25 |
| PA66 | 30 | 30 |
| SEBS | 7 | 7 |
| GF | 33 | 33 |
| CS-1 | 0 | 5 |
| Prestazioni | Unità | 1# | 2# | |
| DensityMelt flow rate （MFR） | g/cm3 | 1.32 | 1.32 | |
| condition：280℃2.16kg | g/10min | 6.8 | 7.9 | |
| Heat distortion temperature（HDT） | 0.45MPa，120℃/h | ℃ | 236.9 | 237.2 |
| 1.82MPa，120℃/h | ℃ | 204.6 | 204.8 | |
| tensile strength | Mpa | 105.3 | 136.5 | |
| tensile rate | % | 1.3 | 3.6 | |
| Resistenza alla flessione | Mpa | 142.6 | 191.6 | |
| Modulo di flessione | Mpa | 6150 | 6270 | |
| Resistenza all'urto con intaglio Izod | J/m | 65 | 132 | |
| Izod unnotched impact strength | J/m | 216 | 597 | |
It can be seen from the above table that adding 5% CS-1, the tensile strength elongation at break, flexural strength and impact strength of the PPO/PA66/GF system are significantly improved, and the flexural modulus has little effect.
Application case two
Mechanical properties of PPO/PA66/GF systems without and with CS-1 added
| Formula | 1#（%） | 2#（%） |
| PPO | 45 | 40 |
| PA66 | 45 | 45 |
| SEBS | 10 | 10 |
| CS-1 | 0 | 5 |
| Prestazioni | Unità | 1# | 2# | |
| densityMelt flow rate （MFR） | g/cm3 | 1.078 | 1.075 | |
| Condition : 280℃2.16kg | g/10min | 12.8 | 10.2 | |
| Heat distortion temperature （HDT） | 0.45MPa，120℃/h | ℃ | 192.6 | 188.5 |
| 1.82MPa，120℃/h | ℃ | 110.3 | 107.3 | |
| tensile strength | Mpa | 42.6 | 55.8 | |
| tensile rate | % | 3.1 | 76.5 | |
| Resistenza alla flessione | Mpa | 58.3 | 59.6 | |
| Modulo di flessione | Mpa | 1820 | 1790 | |
| Resistenza all'urto con intaglio Lzod | J/m | 28 | 268 | |
| Lzod unnotched impact strength | J/m | 253 | NB | |
It can be seen from the above table that the addition of 5% CS-1 increases the tensile strength, elongation at break and impact strength of the alloy system significantly, but has little effect on the flexural strength and flexural modulus.
Recommended dosage
3-8%, which can be increased or decreased in moderation according to the actual application, taking into account the cost.
Packaging and Storage
25KG kraft paper bag lined with plastic bag, as non-dangerous goods, avoid sunlight and rain.
Caratteristica
CS-1are granules with yellow color, low odor. It can be used in PPO/PA66/GF33 System.
| Fisico | Nominal values | Metodo/i di prova |
| Densità | 1.02g/cm³ | ASTM D792 |
| Melt flow rate(190℃、2.16kg） | 8-15g/10min | ASTM D1238 |
| Contenuto di anidride maleica | Centro | Internal method |
| appearance | pellet |
Il nostro vantaggio
Catena di approvvigionamento globale!
Sistema di stoccaggio e logistica della catena di approvvigionamento
Assistenza tecnica
Protezione post-vendita
Concentrazione - Risultati - Eccellenza!
Prodotti personalizzati
Focus su R&S
Servizi globali
Certificazione Coace!
Certificazione ISO9001:2015
Certificazione ISO14001:2015
Registrazione REACH UE
Corea K-REACH pre-registrazione
Vantaggio per le imprese!
Impaginazione in patria e all'estero, meravigliosa per la miscelazione
Layout di marketing nazionale
Layout di marketing all'estero
Applicazione
It can be seen from Figure 1 that the PPO phase of the alloy system without compatibilizer is large in size and irregular in size, showing a typical dual-continuous phase structure. Add 5%CS-1, the size of the dispersed phase is obviously reduced, and it is a regular spherical shape with uniform distribution.
It can be used as compatibilizer of polyamide and polyphenylene oxide alloy.Solutions by industryThe following areas see considerable use of the specially formulated anhydride PPE coupling agent and compatibilizer:Automotive: This product is excellent for improving the performance of PA/PPE blends used in automotive applications, such as electrical connectors, under-the-hood components, and interior automobile components. By enhancing the adherence of PA and PPE, it ensures the dependability and durability of automotive parts in challenging conditions.
Electrical and electronic applications, such as connections, switches, and housings, require the PA/PPE mixes’ qualities to be optimized, which calls for the coupling agent. It improves the compatibility and adherence of the two polymers, resulting in good thermal stability and electrical insulation.
Industrial Equipment: Our specially formulated anhydride PPE is ideal for PA/PPE blends used in applications for industrial equipment, such as gears, bearings, and pump components. It enhances mechanical qualities and wear- and friction-resistance, ensuring dependable performance in industrial situations.
Consumer Goods: The qualities of PA/PPE blends used in the manufacture of consumer goods, such as toys, athletic equipment, and appliances, must be improved with the use of this coupling agent. It improves the adherence of PA and PPE, producing goods that are robust, impact-resistant, and aesthetically pleasing.
