Descrizione dei prodotti
When used as a chemical addition for polymer modification, the Maleic Anhydride SEBS Copolymer Toughening Agent provides outstanding value and effectiveness. This toughening agent allows polymers to reach their maximum potential because of its maleic anhydride modification, compatibility with SEBS copolymers, toughening action, and compatibility with a variety of polymers.Maleic Anhydride SEBS Copolymer Toughening Agent can be added to formulations to improve toughness, durability, energy absorption efficiency, and adaptability for a range of applications in consumer goods, automotive, electronics, and packaging.
Attrezzature avanzate!
Dotata di linee di produzione avanzate e di un centro di prove sperimentali per garantire la qualità del prodotto.
Forte forza tecnica!
Più di 10 esperti tecnici di R&S guidano l'innovazione continua.
Typical Data of Toughening of PA6 Resin
| Prestazioni | Unità | PA6 | PA6+15%W1G | PA6+20%W1G |
| Resistenza alla trazione | MPa | 60 | 51 | 45 |
| Resistenza alla flessione | MPa | 90 | 73 | 67 |
| Resistenza all'urto con intaglio Lzod | J/m | 80 | 650 | 820 |
It can be seen from the above table that W1G has a good effect in nylon toughening and can greatly improve the toughness of nylon.
Typical data for PA/PPO alloys
| Formula | 1#(%) | 2#(%) | 3#(%) | 4#(%) |
| PA6-3280 | 25 | ⸺ | 30 | 60 |
| PPA66-EPR27 | 65 | ⸺ | ⸺ | |
| PPO | 60 | 20 | 50 | 45 |
| CS-1 (PP0 Compatibilizer) | 10 | 10 | 15 | 15 |
| W1G (toughening agent) | 5 | 5 | 5 | 5 |
| Silicone powder | 0.5 | 0.5 | ⸺ | ⸺ |
| PETS | ⸺ | ⸺ | 0.3 | 0.3 |
From the above table, it can be easily seen that the PW1G/PO alloy can improve the flexibility of the product on PA, and the product is easier to carry forward.
Caratteristica
| Articolo di prova | Dati del test | Metodo di prova |
| densità | 0.91 g/cm³ | ASTM D792 ISO 1183 |
| Indice di fusione | 2-9 (190℃,50kg) g/10min | ASTM D1238 ISO 1133 |
| Tasso di innesto | Medio | titolazione acido-base |
| Aspetto | bianco o giallo chiaro Granulare |
W1G is a maleic anhydride grafted polymer. SEBS elastomer is used as the base material. The product has good fluidity, good temperature resistance and aging resistance.
- Maleic Anhydride Modification: To strengthen its chemical linkages with the polymer matrix, maleic anhydride is added to the toughening agent. By improving the toughening agent and polymer’s compatibility and interfacial adhesion, this change allows for more uniform dispersion and better mechanical characteristics.
- The toughening agent is formulated using the styrene-ethylene/butylene-styrene (SEBS) copolymer, which has remarkable compatibility with an array of polymer matrices. It guarantees even dispersion and effective mixing throughout the polymer, which enhances its toughness and resistance to impacts.
- Toughening Effect: Polymers’ toughness and impact resistance are greatly increased by the Maleic Anhydride SEBS Copolymer Toughening Agent. The process of energy absorption and dispersion during deformation lessens the likelihood of crack propagation and improves the material’s resistance to impact and dynamic stress.
- Compatibility with a Wide Range of Polymers: The toughening agent shows compatibility with engineering plastics, ABS, polypropylene, polyethylene, and polystyrene, among other polymer matrices. It provides flexibility and adaptability, enabling the creation of unique solutions to satisfy certain performance standards.
Vantaggio
Increased Toughness: Polymers become more resilient when the Maleic Anhydride SEBS Copolymer Toughening Agent is included. It produces materials that can endure demanding applications and difficult environments by improving the impact resistance, tensile strength, and elongation at break.
Increased Durability: Polymer products have increased durability thanks to the toughening ingredient. It guarantees the modified polymers’ long-term performance and dependability by lowering the chance of cracking, delamination, and deformation.
Effective Energy Absorption: By effectively absorbing and distributing energy during deformation, the toughening agent lowers the chance of stress concentration and crack propagation. It improves the material’s resistance to impact and dynamic loading, making it appropriate for uses where strong impact resistance is needed.
Versatile Uses: The Maleic Anhydride SEBS Copolymer Toughening Agent is used in a wide range of fields and sectors, such as consumer products, automotive, electronics, and packaging. Because of its adaptability, various polymers can be altered to satisfy particular performance needs.
Il nostro vantaggio
Catena di approvvigionamento globale!
Sistema di stoccaggio e logistica della catena di approvvigionamento
Assistenza tecnica
Protezione post-vendita
Concentrazione - Risultati - Eccellenza!
Prodotti personalizzati
Focus su R&S
Servizi globali
Certificazione Coace!
Certificazione ISO9001:2015
Certificazione ISO14001:2015
Registrazione REACH UE
Corea K-REACH pre-registrazione
Vantaggio per le imprese!
Impaginazione in patria e all'estero, meravigliosa per la miscelazione
Layout di marketing nazionale
Layout di marketing all'estero
Applicazione
1. Elastomer modification such as TPE/TPR can be used for encapsulating nylon, etc.
2. Engineering plastics toughening agent compatibilizer
3. Asfalto modificato
4. Adhesive
