Prodotto

Inserire l'uso del prodotto o la natura del prodotto
bisogno, chiedetelo al vostro
contatto. 

Anidride maleica modificata in polietilene lineare a bassa densità Compatibile in lega con poliolefine a bassa emissione di fumi ritardante di fiamma senza alogeni W1L

Modello n.: W1L

Introduzione:

W1L è un prodotto LLDPE-g-MAH di uso generale con eccellenti proprietà globali.
est item Dati del test Metodo di prova
densità 0,92 g/cm³ ASTM D792
Portata di fusione (190°C/2,16kg) 0,5-2,0 g/10min ASTM D1238
Contenuto di anidride maleica Alto Colebond Metodo 1
umidità ≤0,3 % Determinazione rapida dell'umidità con alogeni
Aspetto Granulare
Descrizione dei prodotti

Basic formula of low smoke halogen free flame retardant cable material

formula 1#(%) 2#(%)
magnesium hydroxide/MH-8800 60 60
LLDPE/FL201XV/Exxon Mobil 20 15
EVA/7350M/Formosa Plastics 20 20
W1L 0 5

It can be seen from Figure 1 that the addition of 5% W1L increases the tensile strength of the low-smoke halogen-free flame retardant cable compound system by 90% and the elongation at break by 135%.

Improvement of tensile properties of low-smoke halogen-free flame retardant cable material

1

Application effect of W1L in talc (20%) filled LLDPE system

2-1

Effect of W1L on Tensile Properties of Talc (20%) Filled LLDPE System

3

It can be seen from the figure that in the LLDPE system filled with talc (20%), adding 3% W1L can greatly improve the tensile strength, flexural strength and notched impact strength of the material system.

Dose consigliata:The dose (5-25%) may be increased or decreased properly according to the toughness requirements and by taking the cost into consideration.3-10% shall be adopted for PA6/PA66 reinforcing and toughening, while 5% shall be adopted for the compatibilizer of nylon and polypropylene/polyethylene alloy.

Imballaggio, stoccaggio e trasporto:Sacco kraft da 20 kg con sacchetto di plastica interno. Questo prodotto deve essere trattato come articolo non pericoloso e deve essere immagazzinato o trasportato in condizioni di asciutto, evitando la luce del sole e la pioggia.

Caratteristica

 

W1L is a method of chemical reaction to connect maleic anhydride molecules on the linear low-density polyethylene molecular chain, so that the polyethylene end has the re-reactivity and strong polarity of maleic anhydride polar molecules, so it can improve polyolefin. The interface affinity between the substrate and inorganic substances such as metal powder, glass fiber, wood powder, mineral powder, starch, etc., so as to enhance the strength of the composite material, and is often used as a compatibilizer for polyolefin materials. When this product is used in low-smoke halogen-free flame retardant cable compound, it can improve the compatibility and adhesion between polyolefin matrix and inorganic flame retardant interface. Improve the dispersibility and compatibility of magnesium hydroxide and aluminum hydroxide, so as to maximize the flame retardancy of cable materials, reduce smoke index, smoke generation, calorific value and carbon monoxide generation, increase oxygen index, improve dripping Falling properties, etc., improve the mechanical properties of materials. This product can also be used as a surface improver for extruded sheet or extruded sheet, which can effectively improve the surface flatness of sheet or sheet, and eliminate unevenness and pitting on the surface of the material.

 

Attrezzature avanzate!

Dotata di linee di produzione avanzate e di un centro di prove sperimentali per garantire la qualità del prodotto.

Forte forza tecnica!

Più di 10 esperti tecnici di R&S guidano l'innovazione continua.

 

Vantaggio

 

(1) High flame retardant efficiency, which can endow plastic materials with good flame retardancy;
(2) It has good compatibility with plastic resins and can be well dispersed in resins to form a homogeneous system;
(3) Does not decompose at the processing temperature of the plastic;
(4) Do not reduce the mechanical properties, electrical properties, weather resistance, etc. of plastics;
(5) It has good durability and can be kept in plastic for a long time to play a flame-retardant role;
(6) Non-toxic, odorless, and pollution-free, no toxic gas is produced during the flame-retardant process, and no secondary pollution occurs.

 

Il nostro vantaggio

Catena di approvvigionamento globale!

Sistema di stoccaggio e logistica della catena di approvvigionamento
Assistenza tecnica
Protezione post-vendita

Concentrazione - Risultati - Eccellenza!

Prodotti personalizzati
Focus su R&S
Servizi globali

Certificazione Coace!

Certificazione ISO9001:2015
Certificazione ISO14001:2015
Registrazione REACH UE

Corea K-REACH pre-registrazione

Vantaggio per le imprese!

Impaginazione in patria e all'estero, meravigliosa per la miscelazione
Layout di marketing nazionale
Layout di marketing all'estero

 

Applicazione

11. it Can be used as a compatibilizer for low-smoke halogen-free flame retardant cable materials;
2. It can be used as a surface improver for extruded sheets/plates, which can effectively improve the surface flatness of the material and eliminate the unevenness and pitting on the surface of the material;
3. It can be used as a compatibilizer for polyethylene and glass fiber to promote the compatibility of polyethylene and glass fiber;
4. It can be used as a compatibilizer for masterbatches with PE as a carrier, such as color masterbatches, flame retardant masterbatches, functional masterbatches, etc.;
5. It can be used as a modifier for extending the anti-fog period of anti-fog mulch.

 

 

Modulo di richiesta

Potrebbe piacerti

Aging Resistance Impact Modifiers for Polyamide Compounds

Modello n.: W1G -2

Introduzione:

Coace®W1G-2 è un elastomero stirene-etilene-butilene-stirene modificato con anidride, dotato di buona stabilità e resistenza all'invecchiamento.


Per saperne di più →

Masterbatch inorganico antiacidificazione per film fotovoltaici in EVA

Modello n.: RM210A

Introduzione:

RM210A è uno speciale masterbatch funzionale a base di copolimero etilene-vinilacetato.


Per saperne di più →

Additivi funzionalizzati al silano per moduli fotovoltaici

Modello n.: R1020

Introduzione:

Coace® R1020 è un copolimero olefinico modificato con silano, utilizzato principalmente per i film di incapsulamento fotovoltaico. Ha le caratteristiche di un elevato contenuto di silano, alta trasparenza e basso punto di cristallo.


Per saperne di più →

Fatigue Resistance Aging Resistance Impact Modifiers for PA6, PA66

Model No.: W1P-1

Introduzione:

Coace® W1P-1 is an anhydride modified ethylene propylene diene monomer with high elastic modulus of rubber, fatigue resistance and aging resistance.


Per saperne di più →

LASCIATECI UN MESSAGGIO