Trova messaggi
Low temperature nylon is easy to crack, W1A tells you the solution

 

The weather plummets in winter and the climate turns cold. Sub-zero temperatures appear in many cities, and manufacturers of plastic products in this low-temperature climate have encountered many problems. Recently, many customers have asked: the product usually has good toughness, but now the temperature drops in winter, the product is too brittle, and it cracks when it is lightly thrown on the ground for testing. Can this problem be solved?

 

As a material or product, it needs to adapt to environmental changes, but most nylon materials are brittle, that is, they become brittle after encountering low temperatures and are easily damaged. This is mainly due to the high crystallization tendency and high glass transition temperature of nylon resin. Therefore, it is of good practical significance to explore a reasonable preparation method to avoid the brittleness of nylon at low temperature.

 

 Experiments and analyses show how electrons and protons get together on an electrode surface

 

So how to make nylon maintain its toughness at low temperatures?

 

Coace W1A gives you the answer

4_4US $ 24% OFF_100g Polymorph Instamorph Thermoplastic Friendly Plastic Diy Aka Polycaprolactone Polymorph Pellet High Quality New - Pottery & Ceramics Tools - AliExpress

W1A is a maleic anhydride grafted POE elastomer, which has a low glass transition temperature and therefore has good low-temperature performance. 

POE elastomers can still maintain good flexibility at low temperatures below −50˚C. POE elastomers are used as nylon The toughening agent can improve the low temperature impact resistance of nylon to a certain extent.

W1A not only has the good processability and excellent performance of POE, but also has the reactivity1W1A not only has the good processability and excellent performance of POE, but also has the reactivity of MAH, 

which can react with the polar groups in nylon molecules to improve the compatibility between W1A and nylon, thereby improving the mechanical properties of composite materials. performance.immagine

recente articoli

Come scegliere l'anidride maleica innestata POE appropriata per migliorare la tenacità del nylon?

Progettato appositamente per essere un moderatore d'urto per PA6, PA66 e sistemi poliammidici che necessitano di rinforzo e riempimento, Coace® W1A-F è la scelta perfetta per gli impieghi in cui una maggiore resistenza agli urti e tenacità sono fondamentali.

Per saperne di più →

Nuova svolta nella modifica del PBT: applicazione rivoluzionaria dell'agente indurente POE-g-GMA

L'uso dell'agente indurente POE-g-GMA nella modifica del PBT non solo risolve la fragilità del materiale PBT, ma fornisce anche nuove indicazioni per lo sviluppo dell'industria plastica.

Per saperne di più →

Quando si aggiungono cariche ai materiali compositi PP/PE, è necessario aggiungere un compatibilizzante?

Se si vuole approfondire l'uso dei compatibilizzanti PP-g-MAH, è possibile contattare un fornitore di prodotti chimici professionale per ottenere campioni e supporto tecnico. Il dialogo con COACE aiuta a personalizzare le miscele per soddisfare determinate esigenze applicative.

Per saperne di più →

LASCIATECI UN MESSAGGIO