Post Finder
How to improve photovoltaic efficiency by using silane photovoltaic film additives?

Improving photovoltaic (PV) module efficiency is an important objective in solar energy research. Film additives containing silane-coupling agents have drawn interest as a possible means of raising PV efficiency. The benefits and workings of silane-coupling agent film additives in solar applications are examined in this article. By comprehending their function in augmenting photovoltaic performance, we can open up novel avenues for elevating the solar energy conversion efficiency.

Understanding Film Additives for Silane-Coupling Agents

1.1 Synopsis of Agents for Silane Coupling:

Organosilicon compounds, known as silane-coupling agents, have the ability to form bonds with both organic and inorganic substances. They can enhance the adhesion, compatibility, and interface qualities of materials, which qualifies them for improving the performance of PV films.

1.2 Silane-Coupling Agent Film Supplements for Solar Energy Systems:

PV encapsulation materials are enhanced by the addition of silane-coupling agent film additives. These additives aid in improving the interface between encapsulating materials and solar cells, optimizing the adhesion between layers, and mitigating problems like moisture ingress and delamination.

 

Ways to Increase Photovoltaic Efficiency

2.1 Improved Light Transmission: By lowering light reflection and scattering at the interfaces, silane-coupling agent film additives can increase light transmission through the PV module. As a result, the solar cells may receive more photons, improving their overall energy conversion efficiency.
2.2 Lower Electrical Losses: The electrical conductivity between encapsulating materials and solar cells can be improved by applying silane-coupling agent film additives. This increases charge carrier movement and lowers resistive losses, raising the PV module’s electrical efficiency.

2.3 Better Moisture Resistance: Silane-coupling agent film additions can make encapsulation materials more moisture resistant, limiting water infiltration and probable solar cell damage. This contributes to the preservation of long-term dependability and performance, particularly in tough or humid environments.

The process of choosing and refining silane-coupling agent film additives

3.1 Suitability for Encasing Materials:
The compatibility of the chosen silane-coupling agent film additives with the encapsulating materials must be taken into account. Compatibility testing and optimization are important to ensure the chemical and physical interactions between the additives and the encapsulating materials are favorable.
3.2 Dosage and Formulation: Depending on the particular needs of each PV module, the best dosage and formulation of silane-coupling agent film additives are determined. To maximize the benefits of additives, the right concentration and dispersion must be determined through careful evaluation and testing.

 

Problems solved by using silane photovoltaic film additives

POE membrane uses a conventional method of operation.

Components: POE/Liquid: (crosslinker/co-crosslinker: silane/acrylate)
Issues: High rate of scrap and average PID
Conventional POE film is pre-mixed and soaked in silane, acrylate co-crosslinking agent, and cross-linking agent. Production efficiency will be impacted since liquid adsorption will now take a lengthy time—it may take eight hours or greater. At the discharge port, slippage will result from incomplete precipitation.
Incomplete adsorption will result in the liquid leaking, migrating to the surface, becoming sticky and thick, and readily blocking the vacuum port when the component factory encapsulates the cast film.
The finished component is cured at a temperature as high as 160 degrees. The PID will be impacted and the aging resistance will decline if the silane monomer cannot be rectified quickly.

Resolutions
POE membrane uses the masterbatch solution for grafting.
Ingredients: cross-linking agent, POE, silane graft masterbatch, silane (small amount), and acrylate (small amount).
Because the grafted silane will share the curing processes in the high-temperature stage, the adhesive efficiency will be enhanced, which will ultimately increase the PID aging resistance of the entire component.

The graft masterbatch solution is used in EVA film.
Ingredients: cross-linking agent, EVA, silane graft masterbatch, silane (small amount), and acrylate (small amount).
We will graft EVA onto certain oligomers or other silane types that are less likely to obstruct the vacuum. Ultimately, following grafting, the silane is relatively stable and fixed on the EVA throughout the PCT test of this component, making it resistant to hydrolysis. There will be much better sex.

 

 

EPE film use conventional techniques.
Problem: The cross-linking degree of E and P layers is difficult to match and easy to foam.
It is anticipated that in a three-layer co-extrusion, the adhesion speed or viscosity of the center POE layer and the upper and lower EVA layers will be comparable. Adding a liquid acrylate co-crosslinking agent to the POE is the conventional procedure.
Since POE is non-polar, it cannot firmly adsorb to acrylate. Extended exposure to acrylate will cause it to readily migrate out and absorb into the upper and lower layers of EVA, causing variations in the degree of blistering, wrinkling, and cross-linking.
Resolutions
Instead of adding acrylate directly to the P layer, use an acrylate graft masterbatch.
Acrylic graft masterbatch with three layers of co-extrusion facilitates and completes cross-linking while also preventing migration and improving outcomes.
Dedicated to the research and development, manufacturing, and servicing of solar packaging film additives, COACES boasts an R&D team headed by multiple senior engineers and physicians. The majority of consumers use COAS solar packaging film additives because of their high resistivity, good fluidity, low crystal point, high grafting rate, and high transparency!

 

Prospects and Difficulties for the Future:

Silane-coupling agent film additives have a bright future in solar energy applications. Further comprehension of the mechanics, formulation optimization, and tackling issues like long-term stability, cost-effectiveness, and scalability are the main goals of ongoing study.

 

Silane-coupling agent film additives increase light transmission, lower electrical losses, and strengthen PV module moisture resistance, making them a feasible method of raising solar efficiency. Application necessitates careful evaluation of formulation, dose, and compatibility. The incorporation of silane-coupling agent film additives into photovoltaic technology has great promise for expanding solar energy conversion and satisfying the growing need for sustainable energy solutions as long as research and development activities are sustained.

recent articles

How to Choose the Appropriate POE Grafted Maleic Anhydride for Improving Nylon Toughness?

Designed especially to be an impact moderator for PA6, PA66, and polyamide systems needing reinforcement and filling, Coace® W1A-F is Its special qualities make it the perfect choice for uses where enhanced resistance to impact and toughness are most critical.

Read More →

New breakthrough in PBT modification: revolutionary application of POE-g-GMA toughening agent

Using POE-g-GMA toughening agent in PBT modification not only addresses PBT material brittleness but also provides fresh plastic industry development directions.

Read More →

When adding fillers to PP/PE composite materials, is it necessary to add a compatibilizer?

If one wants to investigate the usage of PP-g-MAH compatibilizers, getting in touch with a professional chemical supplier can give samples and technical support. Talking with COACE helps one customise mixes to satisfy certain application needs.

Read More →

LEAVE US A MESSAGE