Post Finder
How does the ABS/PBT blend alloy solve the compatibility problem?

ABS

▇ Polybutylene terephthalate (PBT)

It is a relatively new type of thermoplastic engineering plastic developed and industrialized by the American Celanese company in the 1970s. It has the following characteristics:

image

PBT has many advantages, but its application is limited due to these two outstanding disadvantages.

▇ Acrylonitrile-butadiene-styrene plastic (ABS)

ABS resin is currently the plastic with the largest output and the most widely used, and the price is relatively cheap. It not only has the mechanical properties of toughness, hardness and rigid phase balance, but also has good dimensional stability, surface gloss, low temperature resistance, coloring processability and processing fluidity.

It can be expected that blending ABS/PBT can produce plastic alloys with excellent performance and realize high performance resin.

However, ABS/PBT alloy is an incompatible system, and the direct blending of the two is prone to delamination and peeling, and the material performance is poor. Therefore, the compatibilizer is the key to the preparation of ABS/PBT alloy.

Appropriate compatibilizers can produce high performance alloys.

Coace self-developed product——BDC can provide excellent compatibilization solutions for ABS/PBT alloys, maximizing the mechanical properties, thermal properties and electroplating properties of plastic alloy systems.

5295fb6fcf4cb96f3ff7c3db17f48d5

recent articles

How to Choose the Appropriate POE Grafted Maleic Anhydride for Improving Nylon Toughness?

Designed especially to be an impact moderator for PA6, PA66, and polyamide systems needing reinforcement and filling, Coace® W1A-F is Its special qualities make it the perfect choice for uses where enhanced resistance to impact and toughness are most critical.

Read More →

New breakthrough in PBT modification: revolutionary application of POE-g-GMA toughening agent

Using POE-g-GMA toughening agent in PBT modification not only addresses PBT material brittleness but also provides fresh plastic industry development directions.

Read More →

When adding fillers to PP/PE composite materials, is it necessary to add a compatibilizer?

If one wants to investigate the usage of PP-g-MAH compatibilizers, getting in touch with a professional chemical supplier can give samples and technical support. Talking with COACE helps one customise mixes to satisfy certain application needs.

Read More →

LEAVE US A MESSAGE