Produit

Saisissez l'utilisation du produit ou la nature du produit que vous
besoin, demandez-le à votre
contact. 

GMA functionalized polyester elastomers increase tensile strength at break elongation Self-degradable material compatibilizer

Numéro de modèle : BP-2

Introduction :

Is a GMA functionalized polyester elastomer, which can be fully degraded by itself, and is mainly used to improve the compatibility of polyester degradable materials.
Élément de test Données d'essai Méthode d'essai
densité 1,21g/cm³ ASTM D792
Melting point(DSC) 121°C ASTM D3418
Maleic Anhydride content Haut Méthode interne
Apparence white or yellowish particles
Description des produits

 

Delamination, surface peeling, and other faults occur during the injection molding, extrusion, and other processing steps used to create degradable plastics. The material strength is also weak and brittle. Compatibilizer can be used to enhance and resolve this type of production issue.

Another name for compatibilizer is compatibilizer. It refers to the auxiliary agent, in this case the polymer compatibilizer, that encourages the blending of two incompatible polymers to produce a stable blend by enhancing the intermolecular bonding force.

Lactic acid is blended with other substances or polymer components in blending modification. The idea is to add polymers with polar and stiff groups to PLA in order to enhance the interaction between polymer chains and increase the endurance of the material. performance. Because other high glass transition temperature compounds and high heat-resistant polymer materials cannot be destroyed, the blending agent is primarily a degradable polymer material. Because the mixing modification procedure is so straightforward, it has currently taken over as the primary PLA alteration technique.

BP-2 is a GMA functionalized polyester elastomer, which can be fully degraded by itself, and is mainly used to improve the compatibility of polyester degradable materials.In biodegradable plastics, it can modify the surface of fillers (starch, calcium carbonate, talc, etc.), improve the dispersibility of fillers, and allow the fillers to be evenly distributed in the entire resin system, thereby increasing the elongation at break of the material. tensile strength, etc. It can be used in PBAT/PLA composite material and PBAT/PLA filler

The deterioration of polyester materials is accelerated by the plastic auxiliary agent. It hastens the disintegration of the polymer chains, making degradation quicker and more effective. In industries like packaging, agriculture, and textiles where controlled degradation of polyester materials is sought, this capability is essential. The breakdown rate of polyester materials may be accurately regulated by integrating our auxiliary agent, providing top performance and environmental sustainability.

Grade Teneur en groupe époxy Density g/㎤ Caractéristiques
BP-2 Haut 1.21 Degradable material compatibilizer, which can be fully degraded by itself

Dose suggérée :3-10%, It can be increased or decreased properly according to the toughness requirements and by taking the cost into consideration.

Emballage, stockage et transport :Sac kraft de 20 kg avec sac plastique interne. Ce produit doit être traité comme un article non dangereux et être stocké ou transporté dans des conditions sèches, en évitant la lumière du soleil et la pluie.

 

Caractéristique
  • BP-2 is suitable for produces which needs high reactivity and low residue.Degradable material compatibilizer, which can be fully degraded by itself.
  • Performance traits of a plastic compatibilizer that degrades:Increase the toughness, tensile strength, and other mechanical properties of the product; improve the gloss, light transmittance, and load-bearing properties of the film;
  • increase the compatibility in the formulation system, aid in the molding of pellets, and increase the toughness and strength of pellets;
  • increase the toughness, tensile, strength, and other mechanical properties of the product;and by increasing the dispersion and compatibility of the formulation system, the goal of increasing the amount of fill.

 

Avantage

 

Un équipement de pointe !

Elle est équipée de lignes de production avancées et d'un centre d'essais expérimentaux pour garantir la qualité des produits.

Une force technique puissante !

Plus de 10 techniciens expérimentés en recherche et développement sont à l'origine d'une innovation permanente.

 

Notre avantage

Chaîne d'approvisionnement mondiale !

Sound Storage And Logistics Supply Chain System (système de chaîne d'approvisionnement)
Support technique
Protection après-vente

Concentration - Réalisation - Excellence !

Produits personnalisés
Priorité à la R&D
Services globaux

Certification Coace !

Certification ISO9001:2015
Certification ISO14001:2015
Enregistrement REACH dans l'UE

Corée K-REACH pré-enregistrement

L'avantage de l'entreprise !

Disposition à l'intérieur et à l'extérieur du pays, idéal pour les mélanges
Schéma de commercialisation intérieure
Mise en place d'un marketing outre-mer

 

Application

 

It can be used as compatibilizers For PLA,PBAT with starch,bamboo powder,inorganic mineral powder and for the PLA/PBAT alloy.

FAQ

1.Can I receive a sample for free?
Yes, with freight collect shipment, we might provide a free sample for testing. Sample will be delivered to the address you have provided.

2.What should I order?
Please email us a query first, describing your plastic goods, ingredients, and the outcome you hope to achieve by adding the additives. After that, we will respond quickly and suggest the best additions for you. Free samples will also be sent out after receiving your approval. Prices for large orders may be negotiated once an effective test result has been obtained. Once payment has been received, delivery for bulk orders will take 1–7 working days.

3.What is your warranty policy?
3 years warranty.

4. Can you build a formulation especially for our unique needs?
Yes, we have a team of experienced engineers to work for you.

 

 

 

Formulaire de demande de renseignements

Vous aimerez peut-être

Compatibilisant modifié au méthacrylate de glycidyle pour les alliages de polyoléfines et de polyester

Numéro de modèle : W5A-2

Introduction :

Coace® W5A-2 est un élastomère de polyoléfine modifié au méthacrylate de glycidyle utilisé comme agent de compatibilité pour les alliages de polyoléfine et de polyester.


Lire la suite →

Toughener en polyester chargé d'agents ignifuges

Numéro de modèle : W5AD

Introduction :

Le W5AD est un polymère spécialisé qui appartient à la classe des élastomères polyoléfiniques modifiés par le méthacrylate de glycidyle et qui se présente sous la forme de granulés de couleur blanche.


Lire la suite →

Compatibilisant pour polypropylène modifié par l'anhydride maléique à taux de greffage élevé

Numéro de modèle : B1C

Introduction :

Coace ® B1C est un polypropylène modifié par l'anhydride maléique avec un taux de greffage élevé.


Lire la suite →

Résistance au vieillissement Modificateurs d'impact pour les composés polyamides

Numéro de modèle : W1G -2

Introduction :

Coace®W1G-2 is an anhydride modified Styrene-Ethylene-Butylene-Styreneelastomer as impact modifiers with good stability and aging resistance.


Lire la suite →

LAISSEZ-NOUS UN MESSAGE