Recherche de poste
About impact modifiers for pp plastics

 

Because many parts require high toughness, some resins with high toughness often have toughness after modification, which is difficult to meet the requirements of use; there are also some parts that require super toughness, but the existing resins cannot meet their toughness requirements, or It can meet its toughness requirements but the price is very high, which requires the use of toughening methods to prepare super-tough new materials. Therefore, tougheners are key materials and additives in modified plastics.

POE is used as an impact modifier for polypropylene PP plastics, which has obvious advantages over traditionally used ethylene-propylene-diene rubber (EPM).

Because many parts require high toughness, some resins with high toughness often have toughness after modification, which is difficult to meet the requirements of use; there are also some parts that require super toughness, but the existing resins cannot meet their toughness requirements, or It can meet its toughness requirements but the price is very high, which requires the use of toughening methods to prepare super-tough new materials. Therefore, tougheners are key materials and additives in modified plastics.

POE is used as an impact modifier for polypropylene PP plastics, which has obvious advantages over traditionally used ethylene-propylene-diene rubber (EPM).

d28ffb3f-12ad-41ed-9acc-28152ee6ceb5

 

First of all, granular POE is easy to mix with granular PP plastics, which saves the complicated granulation or premixing process of bulk ethylene-propylene rubber; secondly, POE and PP plastics have better mixing and dispersion effects. Compared with EPDM, copolymers The phase state of the PP plastic is more refined, so that the impact resistance can be improved; moreover, the use of general rubber as the impact modifier of PP plastics can reduce the yield strength of the product while increasing the impact strength, while using POE elastomers in Toughening while maintaining high yield strength and good processing fluidity.

dfc0f67350d2f63aadd377e72b0a32f

récente articles

Comment choisir l'anhydride maléique greffé POE approprié pour améliorer la résistance du nylon ?

Conçu spécialement pour être un modérateur d'impact pour les systèmes PA6, PA66 et polyamide nécessitant un renforcement et un remplissage, Coace® W1A-F est Ses qualités spéciales en font le choix idéal pour les utilisations où une résistance accrue à l'impact et à la ténacité sont les plus critiques.

Lire la suite →

Nouvelle percée dans la modification des PBT : application révolutionnaire de l'agent tensioactif POE-g-GMA

L'utilisation de l'agent durcisseur POE-g-GMA dans la modification du PBT permet non seulement de remédier à la fragilité du matériau PBT, mais aussi de donner de nouvelles orientations au développement de l'industrie plastique.

Lire la suite →

Lors de l'ajout de charges aux matériaux composites PP/PE, est-il nécessaire d'ajouter un agent de compatibilité ?

Si l'on souhaite étudier l'utilisation des compatibilisants PP-g-MAH, il suffit de contacter un fournisseur professionnel de produits chimiques pour obtenir des échantillons et une assistance technique. Un entretien avec la COACE permet de personnaliser les mélanges afin de répondre à certains besoins d'application.

Lire la suite →

LAISSEZ-NOUS UN MESSAGE