Buscador de puestos
Low temperature nylon is easy to crack, W1A tells you the solution

 

The weather plummets in winter and the climate turns cold. Sub-zero temperatures appear in many cities, and manufacturers of plastic products in this low-temperature climate have encountered many problems. Recently, many customers have asked: the product usually has good toughness, but now the temperature drops in winter, the product is too brittle, and it cracks when it is lightly thrown on the ground for testing. Can this problem be solved?

 

As a material or product, it needs to adapt to environmental changes, but most nylon materials are brittle, that is, they become brittle after encountering low temperatures and are easily damaged. This is mainly due to the high crystallization tendency and high glass transition temperature of nylon resin. Therefore, it is of good practical significance to explore a reasonable preparation method to avoid the brittleness of nylon at low temperature.

 

 Experiments and analyses show how electrons and protons get together on an electrode surface

 

So how to make nylon maintain its toughness at low temperatures?

 

Coace W1A gives you the answer

4_4US $ 24% OFF_100g Polymorph Instamorph Thermoplastic Friendly Plastic Diy Aka Polycaprolactone Polymorph Pellet High Quality New - Pottery & Ceramics Tools - AliExpress

W1A is a maleic anhydride grafted POE elastomer, which has a low glass transition temperature and therefore has good low-temperature performance. 

POE elastomers can still maintain good flexibility at low temperatures below −50˚C. POE elastomers are used as nylon The toughening agent can improve the low temperature impact resistance of nylon to a certain extent.

W1A not only has the good processability and excellent performance of POE, but also has the reactivity1W1A not only has the good processability and excellent performance of POE, but also has the reactivity of MAH, 

which can react with the polar groups in nylon molecules to improve the compatibility between W1A and nylon, thereby improving the mechanical properties of composite materials. performance.imagen

reciente artículos

¿Cómo elegir el anhídrido maleico injertado con POE adecuado para mejorar la resistencia del nailon?

Diseñado especialmente para ser un moderador de impactos para sistemas de PA6, PA66 y poliamida que necesitan refuerzo y relleno, Coace® W1A-F es Sus cualidades especiales lo convierten en la elección perfecta para usos en los que la mejora de la resistencia al impacto y la tenacidad son más críticas.

Leer más →

Nuevo avance en la modificación de PBT: aplicación revolucionaria del agente endurecedor POE-g-GMA

El uso del agente endurecedor POE-g-GMA en la modificación del PBT no sólo resuelve la fragilidad del material PBT, sino que también proporciona nuevas direcciones de desarrollo a la industria del plástico.

Leer más →

Al añadir cargas a los materiales compuestos de PP/PE, ¿es necesario añadir un compatibilizador?

Si se desea investigar el uso de compatibilizantes PP-g-MAH, ponerse en contacto con un proveedor químico profesional puede proporcionar muestras y asistencia técnica. Hablar con el COACE ayuda a personalizar las mezclas para satisfacer determinadas necesidades de aplicación.

Leer más →

DÉJANOS UN MENSAJE