Introducción

One major issue that could cause photovoltaic systems to perform worse is the potential-induced deterioration (PID) effect of solar modules. The function of low crystal point additives in reducing potential-induced deterioration effects in solar modules will be explained in depth by COACE. We will first discuss the mechanics and causes of potential-induced deterioration before concentrating on the ways in which low-crystal point additives might lessen the PID effect’s effects. We will carry out a thorough investigation into the impacts of charge transfer, interface modification, and crystal point control on the inhibitory mechanism of low crystal point additives on PID.

Furthermore, we will investigate the efficacy of low crystal point additions in actual solar systems, as well as their selection and use. We will wrap up by summarizing the low crystal point additives’ potential and future research prospects in terms of reducing PID impacts.

One phenomena that lowers the performance of photovoltaic systems is the potential-induced degradation (PID) effect of solar modules. The PID effect, which reduces the output power of solar modules, typically manifests itself in situations with high humidity and warmth. Researchers have put up a number of solutions to address this issue, one of which is the use of additives with low crystal points. An additive with a low crystal point can reduce the PID effect. Its function in solar modules will be thoroughly examined in this paper.

The reasons and methods behind potential-induced decline

Prior to delving deeply into the function of low crystal point additives, it is imperative that we comprehend the origins and workings of any potential induced degradation. The electric field within the solar module is the primary cause of the PID effect. The electric field in the solar module may lead to the movement and buildup of charges in the material under certain temperature and humidity conditions, which will lower the module’s efficiency. The PID effect is caused by the migration of negatively charged ions to the PN junction surface, which is accelerated by the electric field. This leads to the accumulation of charges and a current diversion. The photovoltaic module’s output power will be decreased by this current bypass, which will ultimately result in a drop in system performance.

The low crystal point additives’ mode of action

In solar panels, low crystal point compounds are commonly employed to reduce the PID effect. Due to certain unique characteristics, they can prevent charge transfer and accumulation brought on by electric fields. The primary methods via which low crystal point additions lessen PID effects are as follows:

2.1 Control of crystal points

Additives with low crystal point can control the development and expansion of crystal points, which lessens the buildup of charge brought on by electric fields. It is possible to stop charges from building up close to crystal points and to hinder the production of new crystal points by applying the right amount of low crystal point additives. By doing this, the current bypass phenomena may be lessened and the solar module’s output power may rise.

2.2 Modification of the interface

Low crystal point additions might also lessen the PID impact by altering the solar modules’ interface characteristics. They have the power to alter the material surface’s charge distribution and boost the PN junction’s resilience. The PID effect can be lessened by forming a protective layer to stop negative ions from building up on the PN junction surface and adding low crystal point additives.

2.3 Charge transfer’s effect

Low crystal point additives have the potential to mitigate charge migration and buildup during the charge transport process in solar modules. They have the power to alter the material’s electron cloud’s structure as well as speed up and slow down charge migration and capture. By doing this, the charge accumulation brought on by electric fields is lessened, and the solar module’s stability and efficiency are increased.

Choosing and using additives with low crystal points

To lessen PID impacts, the right low crystal point additives must be chosen. Several low-crystal point additions were shown to be effective by the researchers through testing and comparison of various materials. Metal oxides, polymers, and organic molecules are some examples of these additions. Take into account a low crystal point additive’s optical qualities, thermal stability, and suitability for use with photovoltaic materials.
Typically, low crystal point additives are applied to the encapsulation and backsheet materials of solar modules. This can be accomplished within the photovoltaic module manufacturing process and has minimal effect on the current production procedures. For the duration of the solar module, long-lasting PID suppression can be achieved by adding low crystal point additives to the backsheet and encapsulation materials.

Impact of low crystal point additions and potential avenues for future investigation

Low crystal point additives significantly lessen the PID impact, according to existing research. They can raise the system’s efficiency and dependability while lowering the power losses of photovoltaic modules. Still, there are a few problems and obstacles that need more investigation.
The development of low crystal point additives with improved stability and efficiency is one area of future research focus. To improve PID suppression, more investigation into the synthesis and characteristics of materials will be necessary.

Additionally, more investigation is required into how low crystal point compounds function in various environmental settings. It is important to evaluate the inhibitory effect of low crystal point additions in high humidity and high temperature environments, as these are the conditions under which the PID effect typically manifests.

To sum up

In solar modules, low crystal point additives are crucial for reducing the impacts of potential-induced deterioration. Low crystal point additives can lessen charge accumulation brought on by electric fields and enhance the efficiency and dependability of solar modules through the influence of crystal point management, interface modification, and charge transport. Appropriate low crystal point additives applied correctly during the manufacturing process can provide long-lasting PID suppression. To fulfill the increasing needs of solar systems and enhance the stability and efficacy of low crystal point additives, more study and development is still required. COACE has a team of senior engineers and PhD holders who oversee the R&D, manufacture, and servicing of aditivos para películas de envasado fotovoltaico. The majority of consumers use COAS solar packaging film additives because of their high resistivity, good fluidity, low crystal point, high grafting rate, and high transparency!
​