Buscador de puestos
About impact modifiers for pp plastics

 

Because many parts require high toughness, some resins with high toughness often have toughness after modification, which is difficult to meet the requirements of use; there are also some parts that require super toughness, but the existing resins cannot meet their toughness requirements, or It can meet its toughness requirements but the price is very high, which requires the use of toughening methods to prepare super-tough new materials. Therefore, tougheners are key materials and additives in modified plastics.

POE is used as an impact modifier for polypropylene PP plastics, which has obvious advantages over traditionally used ethylene-propylene-diene rubber (EPM).

Because many parts require high toughness, some resins with high toughness often have toughness after modification, which is difficult to meet the requirements of use; there are also some parts that require super toughness, but the existing resins cannot meet their toughness requirements, or It can meet its toughness requirements but the price is very high, which requires the use of toughening methods to prepare super-tough new materials. Therefore, tougheners are key materials and additives in modified plastics.

POE is used as an impact modifier for polypropylene PP plastics, which has obvious advantages over traditionally used ethylene-propylene-diene rubber (EPM).

d28ffb3f-12ad-41ed-9acc-28152ee6ceb5

 

First of all, granular POE is easy to mix with granular PP plastics, which saves the complicated granulation or premixing process of bulk ethylene-propylene rubber; secondly, POE and PP plastics have better mixing and dispersion effects. Compared with EPDM, copolymers The phase state of the PP plastic is more refined, so that the impact resistance can be improved; moreover, the use of general rubber as the impact modifier of PP plastics can reduce the yield strength of the product while increasing the impact strength, while using POE elastomers in Toughening while maintaining high yield strength and good processing fluidity.

dfc0f67350d2f63aadd377e72b0a32f

reciente artículos

¿Cómo elegir el anhídrido maleico injertado con POE adecuado para mejorar la resistencia del nailon?

Diseñado especialmente para ser un moderador de impactos para sistemas de PA6, PA66 y poliamida que necesitan refuerzo y relleno, Coace® W1A-F es Sus cualidades especiales lo convierten en la elección perfecta para usos en los que la mejora de la resistencia al impacto y la tenacidad son más críticas.

Leer más →

Nuevo avance en la modificación de PBT: aplicación revolucionaria del agente endurecedor POE-g-GMA

El uso del agente endurecedor POE-g-GMA en la modificación del PBT no sólo resuelve la fragilidad del material PBT, sino que también proporciona nuevas direcciones de desarrollo a la industria del plástico.

Leer más →

Al añadir cargas a los materiales compuestos de PP/PE, ¿es necesario añadir un compatibilizador?

Si se desea investigar el uso de compatibilizantes PP-g-MAH, ponerse en contacto con un proveedor químico profesional puede proporcionar muestras y asistencia técnica. Hablar con el COACE ayuda a personalizar las mezclas para satisfacer determinadas necesidades de aplicación.

Leer más →

DÉJANOS UN MENSAJE