Coace’s products, product ranges & product families
A high-tech enterprise integrating R&D, production and sales of polymer materials, specialising in R&D, production, sales and service of plastic compatibilizers and tougheners.
PM with 75:25 ratio of LDPE to ABS (physical mixing) and CM with 75:25:5 ratio of LDPE, ABS to MA (chemical mixing) were prepared by …
Coupling agents and compatibilizers are the principal ingredients used in surface treatment. The coupling agents are specifically silanes, titanates, and aluminates.
In the previous article we covered a few common areas of application for composites, and in this article we will continue with others. The new …
The blending of TPU and PP promotes the formation of β crystal form, increases the crystallization temperature but reduces the crystallinity, and can play a significant role in toughening.
EVA photovoltaic encapsulation film production machine The main components of the whole set of equipment consist of extruder, mould, five-roller calender, thickness gauge, winder and …
Dynamic vulcanization is the crosslinking reaction of the dispersed phase during the melt blending of two polymers.
The amount of inorganic nanoparticles added to the plastic is small, generally 3%-5%, and the density of the composite material is almost unchanged or increased very little compared with the original resin, and there is no disadvantage of decreasing other properties due to too much filler.
Introduction: To increase the interfacial adhesion between the fibers and the matrix in polymer composites, coupling agents and compatibilizers are frequently utilized. The composite material's …
(1) Modified filling Filling masterbatch is to reduce production costs as the main purpose, mostly using inorganic powders or industrial waste at low prices and …