Post Finder
About impact modifiers for pp plastics

 

Because many parts require high toughness, some resins with high toughness often have toughness after modification, which is difficult to meet the requirements of use; there are also some parts that require super toughness, but the existing resins cannot meet their toughness requirements, or It can meet its toughness requirements but the price is very high, which requires the use of toughening methods to prepare super-tough new materials. Therefore, tougheners are key materials and additives in modified plastics.

POE is used as an impact modifier for polypropylene PP plastics, which has obvious advantages over traditionally used ethylene-propylene-diene rubber (EPM).

Because many parts require high toughness, some resins with high toughness often have toughness after modification, which is difficult to meet the requirements of use; there are also some parts that require super toughness, but the existing resins cannot meet their toughness requirements, or It can meet its toughness requirements but the price is very high, which requires the use of toughening methods to prepare super-tough new materials. Therefore, tougheners are key materials and additives in modified plastics.

POE is used as an impact modifier for polypropylene PP plastics, which has obvious advantages over traditionally used ethylene-propylene-diene rubber (EPM).

d28ffb3f-12ad-41ed-9acc-28152ee6ceb5

 

First of all, granular POE is easy to mix with granular PP plastics, which saves the complicated granulation or premixing process of bulk ethylene-propylene rubber; secondly, POE and PP plastics have better mixing and dispersion effects. Compared with EPDM, copolymers The phase state of the PP plastic is more refined, so that the impact resistance can be improved; moreover, the use of general rubber as the impact modifier of PP plastics can reduce the yield strength of the product while increasing the impact strength, while using POE elastomers in Toughening while maintaining high yield strength and good processing fluidity.

dfc0f67350d2f63aadd377e72b0a32f

recent articles

How to Choose the Appropriate POE Grafted Maleic Anhydride for Improving Nylon Toughness?

Designed especially to be an impact moderator for PA6, PA66, and polyamide systems needing reinforcement and filling, Coace® W1A-F is Its special qualities make it the perfect choice for uses where enhanced resistance to impact and toughness are most critical.

Read More →

New breakthrough in PBT modification: revolutionary application of POE-g-GMA toughening agent

Using POE-g-GMA toughening agent in PBT modification not only addresses PBT material brittleness but also provides fresh plastic industry development directions.

Read More →

When adding fillers to PP/PE composite materials, is it necessary to add a compatibilizer?

If one wants to investigate the usage of PP-g-MAH compatibilizers, getting in touch with a professional chemical supplier can give samples and technical support. Talking with COACE helps one customise mixes to satisfy certain application needs.

Read More →

LEAVE US A MESSAGE